- EM CENTRAL MONITORING SYSTEM
- CENTRAL BATTERY SYSTEM
- Emergency Light & Exit Sign
- Fire Fighting Products
- Safety & Security Products
- Emergency Light Battery Assembly
- LED Emergency Drive
- Commercial Lighting
UL EXIT SIGN LX-750AR/G
UL certified exit sign with led light LX-750G/R
Emergency exit sign luminaire LX-751G
Passageway light exit signs LX-752G
Escape Route Signs and Fire Exit Luminaires LX-753
UL listed Exit sign emergency lighting LX-741A12G/R
Press test button once (within 3 seconds) | 1 minute test |
Press test button twice (within 3 seconds) | 5 minute test |
Press test button 3 times (within 3 seconds) | 90minute test |
Press test button 4 times (within 3 seconds) | 180minute test |
Press test button once(In test mode ) | Cancels test |
UL listed Exit sign light LX-741A34
UL certified exit sign emergency lighting LX-755A12G/R
EMERGENCY EXIT SIGN LIGHT
*Fire retardant ABS housing, safe material for fire protection
*8PCS LEDs inside housing,two colors green and red are available
*Charge indicator light and test button can show us function at any time to ensure the light is workable
*Input Voltage:120V/277V AC 50/60HZ for different electricity demand
*Rated Power:2.5W
*Nickel cadmium battery provides at least 3hours backup power in the event of a power outage:4.8V 500MAH,it is rechargeable battery,24 hours charging time with battery overcharge and discharge protection
*UL approval fire exit signs are suitable for USA,middle east market
*Multiple –Mounting:The LED exit sign is available for ceiling mounting,backside mounting and side mounting
*Single or Double faces are optional: Extra face plate included for optional double sided use.The bracket is packed inside of the light housing
*There are two snap-in directional arrows in accessory bag
*Suitable for both commercial and residential areas
*1PC emergency exit sign is packed into a white box or color box,10PCS/master carton, customized packaging is available
SAFETY INSTRUCTIONS:
1.Do not use outdoors.
2.Do not mount near gas or electric heaters.
3.Do not let power supply cords touch hot surfaces.
4. Use caution when servicing batteries. Battery acid can cause burns
to skin and eyes. If acid is spilled on skin or eyes. Flush acid with fresh water and contact a physician immediately.
5.Equipment should be mounted in locations and at heights where it
will not be subjected to tampering by unauthorized personnel.
6. The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition.
7.Do not use this equipment for other than its intended use.
8.Before wiring to power supply and during servicing,turn off AC power at fuse or circuit breaker.
9.Disconnect AC power and unplug battery before servicing.
10.Battery in this unit may not be fully charged.After electricity is
hooked up to unit,let the battery charge up for at least 24hrs,then
normal operation of this unit should take effect.
11.All Servicing should be performed by qualified personnel.