Short Description:

 EXIT SIGN LIGHT
*Steel case with acrylic panel with “EXIT”, single face configuration
*20PCS LEDs inside housing with white color light

*Charge indicator light and test button can show us function at any time to ensure the light is workable
*Input Voltage:120V/277V AC 50/60HZ suitable for different electricity demand
*Rated Power:7W
*Nickel cadmium battery provides at least 3hours backup power in the event of a power outage:3.6V 2.8AH,it is rechargeable battery,24 hours charging time with battery overcharge and discharge protection
*UL approval fire exit signs are suitable for USA,middle east market

*Easy wall installation can be finished within several minutes

 *Suitable for both commercial and residential areas

*1PC emergency exit sign is packed into a neutral white box or color box,10PCS/master carton, customized packaging is available

SAFETY INSTRUCTIONS

1.If you feel you do not have electrical wiring experience, refer to a do-it-yourself wiring handbook or have your fixture installed by a qualified licensed electrician.

2.All electrical connections must be in accordance with local codes, ordinances, and the National Electric Code. If you are unfamiliar with methods of installing electrical wiring, secure the services of a qualified licensed electrician.

3.Before starting the installation, disconnect the power by turning off the circuit breaker or removing the appropriate fuse at the fuse box .Turning the power off using the light switch is not sufficient to prevent electrical shock.

4.Do not use outdoors.

5.Do not let power supply cords touch hot surfaces.

6.Do not mount near gas or electric heaters.

7.Equipment should be mounted in location and at heights where it will not readily be subject to tampering by unauthorized personnel.

8.The use of accessory equipment not recommend by the manufacturer may cause an unsafe condition.

9.Do not use this equipment for other than intended use.

10.All servicing should be performed by qualified personnel only.

11.Allow battery to charge for 24 hours before first use.

12.Use flexible conduit only.